Cannon VB-C500VD Guide d'installation télécharger pdf (Page 22)

1-8

Setting the Administrator Password, LAN, IPv6, DNS, etc. (Network)

LAN

(1) [IP Address Setting]

Select [Auto (DHCP)] or [Manual] as the address setting mode. If [Auto (DHCP)] is selected,

the values automatically acquired from the DHCP server will be entered in [IP Address],

[Subnet Mask] and [Default Gateway Address]. If [Manual] is selected, directly enter the

values appropriate for the environment in which the camera is used.

(2) [IP Address]

If [Manual] was selected in (1), enter a fixed IP address.

(3) [Subnet Mask]

If [Manual] was selected in (1), enter the subnet mask specified for each network.

(4) [Default Gateway Address]

Enter an appropriate value if [Manual] was selected in (1). Be sure to set the default gateway

address when connecting the camera to a subnet different from that of the viewer.

(5) [LAN Interface]

Select [Auto], [Full Duplex] or [Half Duplex]. Normally [Auto] should be used.

(6) [Maximum Packet Size]

Enter the maximum transmission unit. Normally the default setting of 1500 needs not be

changed.

COPY

1 2 ... 17 18 19 20 21 22 23 24 25 26 27 ... 159 160

Pas de commentaire

Cannon VB-C500VD Guide d'installation Page 22